Career Guides

Is Welding a Good Career? Pay, Specialties and Physical Cost

BLS projects welding employment to grow just 2% from 2025 to 2035, slower than the economy as a whole. Yet the same projections show about 40,300 welding openings every year. That gap explains most of the career: welding is not a boom trade, but it is a large one where people constantly retire or move on, so trained welders keep getting hired.

Is welding a good career, then? For someone who likes precise hands-on work, can handle heat and awkward positions, and takes fume safety seriously, yes. Below are the pay figures, how long training takes, which certification matters, the specialties that lift earnings, and the health costs you should weigh before you start.

What welders earn, by where they work

The national median pay for welders, cutters, solderers and brazers was $53,750 a year, or $25.84 an hour, in May 2025 (BLS wage survey). The lowest 10% earned under $39,240 and the highest 10% more than $77,530.

The industry you join makes a measurable difference. BLS lists these medians for the largest employers of welders:

IndustryMedian annual pay, May 2025
Specialty trade contractors$59,440
Manufacturing$51,210
Merchant wholesalers, durable goods$50,290
Administrative, support and waste services$48,810

The spread at the top, more than $77,000 for the best-paid tenth, mostly reflects specialty, certification level, overtime, and willingness to travel to industrial or field work. The full occupation profile, with the tasks and tools employers expect, is on our welders, cutters, solderers and brazers career page.

How long it takes to become a welder

BLS lists a high school diploma or equivalent as the typical entry education, followed by moderate-term on-the-job training. In practice, most employers prefer some formal technical training first. That training is offered by high school technical programs, vocational institutes, community colleges, private welding schools and the military.

A realistic timeline looks like this:

  1. Technical training: a certificate or diploma program, typically months rather than years, focused on the main processes and blueprint reading.
  2. Several months of on-the-job training: BLS notes that even trained entry-level welders get this from their first employer.
  3. Certification tests: taken as your employer or target jobs require, for specific processes and positions.

Because the entry route skips a four-year degree, welding is one of the faster ways into skilled, better-than-minimum pay. If you are comparing options of this kind, our overview of career change paths that do not need a degree sets welding against other short-training routes.

The certification that matters most

BLS says some states and localities license welders and that some employers require certification for particular jobs. OSHA also requires welders to complete electrical safety training.

The most widely known credential is the AWS Certified Welder program from the American Welding Society. According to AWS:

  • There are no prerequisite courses, certifications, or minimum experience or education requirements.
  • You pass a hands-on performance test, not a written exam, at an AWS Accredited Test Facility.
  • You weld to a written procedure, and a Certified Welding Inspector judges the result against the relevant code for structural steel, pipelines, sheet metal or similar work.
  • The certification stays valid only while you keep submitting maintenance records that show you are still using the process. AWS's own page gives both a six-month and an annual schedule, so confirm the current deadline with your test facility.

Each certification covers a specific process and position, so welders build up a set of them over time. That stack, more than years on the job, is what moves you into higher-paying work.

Specialties that tend to pay more

BLS does not publish pay by welding process, so treat this as a direction rather than a promise. The higher-paid end of the trade usually involves harder tests and harder conditions:

  • Pipe welding: work on pipelines, refineries and plants, often with demanding position tests and travel.
  • Structural and field welding: buildings and bridges, outdoors and often at height.
  • Precision TIG work: stainless and aluminium for food, aerospace or medical equipment makers.
  • Inspection: moving from welding to judging welds, a step many experienced welders aim for later in their careers.

Contract and travelling welders often get work through agencies. This explainer on how specialty staffing agencies work for skilled trades shows what to expect from that route and what to ask before you sign.

The physical cost: read this before you enrol

Welding carries real health risks, and they are worth understanding on day one rather than year ten.

OSHA's fact sheet on "Controlling Hazardous Fume and Gases during Welding" (FS-3647) lists metals found in welding fume, including chromium, manganese, nickel, lead and cadmium. Short-term exposure can cause eye, nose and throat irritation, dizziness and nausea. OSHA says prolonged exposure may cause lung damage and cancers of the lung, larynx and urinary tract, and that long-term manganese exposure can cause symptoms like Parkinson's disease. Welding stainless steel can produce hexavalent chromium, which OSHA describes as highly toxic.

Shielding gases such as argon and carbon dioxide can displace oxygen in enclosed spaces, which makes confined-space welding without ventilation dangerous.

Do and don't on the shop floor

  • Do use local exhaust ventilation and keep the extractor close to the plume.
  • Do position yourself so the fume rises away from your face, and stay upwind outdoors.
  • Do clean paint and solvent residue off surfaces before welding.
  • Don't weld in a confined space without ventilation and the right procedures.
  • Don't stay in the area if you feel dizzy or nauseated; OSHA says to leave, get fresh air and seek medical attention.

The other physical demands are plain. BLS notes heavy lifting, awkward positions, work at height and outdoor work in all weather. Many manufacturers run two or three shifts of 8 to 12 hours, so evenings and weekends are common.

Frequently Asked Questions

How much do welders make an hour?

The BLS median was $25.84 an hour in May 2025, or $53,750 a year. The bottom 10% earned under about $39,240 a year and the top 10% over $77,530. Specialty trade contractors paid a higher median than manufacturing, at $59,440 against $51,210.

Is welding hard on your body?

It can be. The work involves heat, bright arc light, fumes, lifting and awkward positions, sometimes at height. OSHA links long-term fume exposure to lung damage and some cancers. Good ventilation, correct positioning and protective gear reduce the risk, so judge employers partly on how seriously they treat fume control.

Do I need to go to welding school?

Not strictly. BLS lists a high school diploma as the typical entry level, and the AWS Certified Welder test has no prerequisites. In practice, most employers prefer applicants with formal technical training, and a program gives you supervised practice on several processes before your first certification test.

Is welding a dying trade?

No. Growth is slow, at 2% from 2025 to 2035, but BLS still projects about 40,300 openings a year, mostly from welders retiring or leaving. That steady replacement demand is why trained welders keep finding work even in a slow-growth trade.

The decision in one line

If you can picture yourself under a hood for eight hours and you will insist on proper ventilation, book a tour of a local welding program and ask to try a practice booth: an hour of real welding will tell you more than this whole page.

This article is for informational purposes only and does not constitute professional career advice. Occupational data sourced from O*NET and the U.S. Bureau of Labor Statistics.